Celestron Astromaster 130EQ What Can You See Through it

Celestron Astromaster 130EQ What Can You See Through it

Being Astro enthusiasts can be quite troublesome. 

Especially when you are about to choose the right telescope and Astromaster 130eq is on your wishlist.

So, using Celestron Astromaster 130eq what can you see actually?

You can use the Celestron Astromaster 130eq to get a vivid picture of the moon, planets, nebula, and whatnot? This Newtonian reflector will enable you to see the rings of Saturn and the moon of Jupiter as well. It’s a perfect telescope for any novice with good aperture, affordability, and usability.

However, If you want to find E.T’s planet, then you must know more about the telescope.

Don’t feel alone, space ranger! The article I got here will help you in your space voyage about telescopes.

What are we waiting for? Initiating ignition in 3,2,1!

Celestron Astromaster 130EQ: Show Me the Unseen

Normally, beginners use Celestron Astromaster 130EQ for close-range astrography as well as deep-sky learning.

Especially those who don’t know the difference between astronomy and birdwatching binoculars.

Here’s our recommendation for binoculars that are perfect for both astronomy and birdwatching.

Also, the Celestron Astromaster 130EQ price is very reasonable and easy to use.

Because of this, you can use this Newtonian telescope to see the Moon and the planets. 

Target-01: The Moon

Let’s start from the closest, our friendly neighborhood, the Moon! Celestron Astromaster 130EQ is a good deal if you want to look at the moon. 

In fact, you can see the moon at any level zooming. 

If you use a low span of zooming, you will get a more in-depth image of the Moon. 

If you want a more detailed view, then you can view it at a more zooming level.

Target-02: Planet Saturn

Just like the Moon, you can have a glimpse of Saturn at any range of magnification. 

You will be able to see the rings around the planet, as well as the shade of the rings over the planet’s surface. 

You can zoom in a bit more if you want a picture more detailed than regular. 

Target-03: Planet Jupiter

Well, things can get a bit tricky when it comes to Jupiter. Normally Jupiter seems to be seen easily by the default setup of the 130EQ. Nevertheless, sometimes you may magnify the view but find the image a bit dark. 

It’s none other than the increase of contrast. Usually, this is the challenge that you may face when you try to look for a more zoomed image of Jupiter. 

Again, since high magnification can make the view blurry, an average magnification is commonly applied to see Jupiter. This makes the observation process a bit lengthy.

Target-04: Planet Mars

Planet Mars is also easy to observe with the 130EQ. Make sure that the distance between Mars and the Earth is to the least. Then you can get a great view!

Whoa! There go the planets. Then what about the deep-sky elements? How about we give it a look?

Target-05: Under the Darkness

It’s true that not all deep-sky elements you will be able to see using Celestron Astromaster 130EQ. 

It’s not your fault. 

The main culprit is light pollution. Since these deep sky fellows are kind of less bright, polluted light makes it more difficult to see these elements. 

Still, you can view some of these deep vaulted matters of the sky-

  • The Messier 13
  • Messier 42, also known as the Orion nebula
  • Andromeda Galaxy
  • Even the Apple Core Nebula

These are the things you’ll see with the blessing of the Celestron Astromaster 130EQ. No wonder why the Celestron Astromaster 130EQ reviews are good!

How to See What I Want to See: There’s No Secret Recipe

Well, the 130Eq won’t work on its own. If you really want to see the moon, planets, nebulae, then you must know how to use the Celestron Astromaster 130EQ.  

Plus, keep an eye on some factors, That’s it!

Set-Up

Let’s start from the basics. You must know how to set up Celestron Astromaster 130EQ accessories. Any mistake while mounting the telescope and you might end up with a bitter experience. 

So, set up the whole telescope properly.  There are many tutorials across the internet on building solar telescopes

You can check them out.

Wait! Why go this far? Instead, you can give a watch to the user manual!

Choose a Perfect Spot

If you want a solid and clean shot, then you must choose the perfect place. The image quality can depend on where you are using the telescope. 

Take your telescope to places from where you can get a clean shot. Typically, places with a clear view of the sky are recommended since you can get a straight view from these places. 

If you are at home, you can use your rooftop or even your window to the least. Even if you can, go to any open place or high land. 

The more clear the view and the less the distance, the better the images!

Right Time Right Shot

For the Celestron Astromaster 130EQ images, Perfect timing is very necessary. 

As planets orbit just like Earth orbits across the Sun, the distance of many planets from the Earth varies. 

At some point in their circulation, planets can get closer to the Earth. 

Then getting a perfect picture of the planet becomes just a piece of cake. Otherwise, if planets are far away, you may end up getting blurry pictures.

Buy Some Time

Be patient! Sometimes you must see some planets clearly in a short moment, sometimes you may not. 

Now just don’t leave the telescope if you can’t find anything in a minute or two. Give some time. Perhaps, you won’t get disappointed.

Adept for the Dark

It’s a small trick you can use to see the deep-sky things. Since these matters are a bit dark, It’s better to adjust your eyes in the dark a bit. 

Stay away from any bright source for a while, stay in the dark. Soon you will be able to see like a cat burglar. Rather a space burglar!

Check Intensity

Since light pollution can be a problem to watch deep-sky matters, you must keep an eye on that. 

Always check the light pollution intensity of your observation area. Then choose the place with the least pollution. 

This way you will be able to get a better view. Use a light pollution map if necessary.

Use Software Guidance

Some software offers a chart of the coordinates of the planet. You don’t need to feel lost. Select the right astrology software. Then find the desired coordinate.

Modify if Necessary

You can modify the telescope according to your comfort!

Celestron Astromaster 130EQ upgrades can give you a performance boost while using the telescope. 

You can modify the eyepieces or can change the mounting. Your call!

There you go! Keep these things in my mind and you won’t have to say, “Celestron Astromaster 130EQ can’t see anything.”

FAQs

What is the teason for my Celestron Telescope being blurry?

The answer is excessive magnification. You might increase the magnification to get a detailed view. Unfortunately, it just gets pixelated. As a result, you get blurry images from the telescope. Usually, any value of zooming more than 200x can give a blurry result.

How many eyepieces are required for the telescope?

Typically, a telescope comes with a set of 4 pieces of eyepieces.However, 2 eyepieces come with Celestron Astromaster 130EQ, One is 10mm and the other one is 20mm. A proper set of eyepieces can give a fine performance.

Isit necessary to use a barlow lens?

For beginners, using the Barlow lens is beneficial.Barlow lens enhances the magnification for any eyepiece.If you are a greenhorn in using a telescope and eyepiece, then you will get an advantage if you use the Barlow lens.A Barlow lens can increase the relief percentage for the eye by up to 30%.

Final Thrust

This is it, Copernicus! Hope now you know with Celestron Astromaster 130eq what can you see. 

For any hesitation, you can ask a professional and check on any other Celestron telescopes.

Till then stay safe and keep surveying the space.

Perhaps you may see the Millenium Falcon at your scope!

Leave a Comment

Your email address will not be published.